Papers, in alphabetical order

[#]

3D Human Face Modelling: Soft Tissues Landmarking

ZOMPI, Antonio; TORNINCASA, Stefano; VEZZETTI, Enrico; MOOS, Sandro; VIOLANTE, Mariagrazia; MARCOLIN, Federica

DIGEP-Politecnico di Torino

3D Land Models with simple modeling tools

SANTAMARÍA, Jacinto; SANZ, Félix

UNIVERSIDAD DE LA RIOJA

[A]

A coherent teaching program for a course of product design at master degree level

RIZZUTI, Sergio

University of Calabria - DIMEG

A Finite Element Method to support the materials selection phase during the insole design process

MANDOLINI, Marco; GERMANI, Michele; RAFFAELI, Roberto

Università Politecnica delle Marche

A global approach of the intermediary object: A case study in virtual environment

AL KHATIB, Ahmad; MAHDJOUB, Morad; BLUNTZER, Jean-Bernard; SAGOT, Jean-Claude.

Université de technologie Belfort-Montbéliard

A graph-based approach to CAD modeling: a digital pattern application to the sizing and modeling of manual transverse gearboxes

LANZOTTI, Antonio; PATALANO, Stanislao; VITOLO, Ferdinando

UNIVERSITY OF NAPLES FEDERICO II

A new methodology to evaluate the flying shape of a sail

INGRASSIA, Tommaso; NIGRELLI, Vincenzo; GELSOMINO, Gabriella

Università degli Studi di Palermo

Adding value to natural fiber reinforced materials by means of product design and development

JULIÁN, Fernando; VERDAGUER, Narcis; TRESSERRAS, Josep; ESPINACH, Francesc Xavier

University of Girona

Alelhomology between conics

FERNANDEZ RODRIGUEZ, Manuel

Universidad de Oviedo

An Algorithm for Complex Surfaces Modelling Using MatLab

PÉREZ VÁZQUEZ, Manuel; VÁZQUEZ PAZ, José

Universidade de Vigo

Analytical study of an interference fit fastener assembly

PAREDES, Manuel; SARTOR, Marc; NEFISSI, Naoufel

INSA, Institut Clément Ader

Associative modeling of manufacturing information in CAD-Systems

FASSI FIHRI, Nabil; GOTTWALD, Martin; DENEUX, Dominique; BOHN, Martin

ENSIAME / DAIMLER

[C]

CAD Data Workflow toward the Thermal Simulation and Visualization in Virtual Reality

NUGRAHA BAHAR, Yudi; LANDRIEU, Jérémie; PERE, Christian; NICOLLE, Christophe

Arts et Metiers ParisTech France

CAD Modeling and Simulation af a New Semi-Automatic Machine for Olive Oil Packaging

SPERANZA, Domenico

University of Cassino

Comparative analysis of a university learning experience. Classroom mode versus distance mode.

FÁBREGAS RUESCAS, Juan José; HERNANDEZ ABAD, Francisco; HERNANDEZ ABAD, Vicente; ROJAS SOLA, José Ignacio

Universidad Politécnica de Cataluña

[D]

Design and processing of a virtual female pelvic cavity for gynecological and obstetrical teaching of medical students

PATROUIX,Laurent; QUAEGEBEUR, Philippe; GIRAUDET,Géraldine; BRIEU, Mathias; COSSON, Michel; LECOMTE, Pauline.

Ecole Centrale de Lille

Design characterization and automatic identification of character lines in automotive field

BAGASSI, Sara; LUCCHI, Francesca; PERSIANI, Franco

University of Bologna

Design of a cordless hair dryer product

RODRIGUEZ QUIJADA, Constanza; DE CÓZAR MACÍAS, Óscar David; CASTILLO RUEDA, Francisca José; LADRÓN DE GUEVARA LÓPEZ, Isidro; BLÁZQUEZ PARRA, Elidia Beatriz

UNIVERSIDAD DE MÁLAGA

Design of a Cupola to Download Concrete

MIRALBES, Ramon; RANZ, David; COMAS, Roger; SANTOLAYA, Jose Luis

University of Zaragoza

Designing usable interface for people with dementia

CECCACCI, Silvia; GERMANI, Michele; MENGONI, Maura

Università Politecnica delle Marche

Detection of small features in flat-field images of astronomical cameras: application to the OSIRIS instrument on board the Rosetta (ESA) mission

BENITEZ, Alicia D.; LARA, Luisa M.;

Instituto de Astrofísica de Andalucía (IAA-CSIC)

[E]

Engineering and Architecture Applications based on Unmanned Aerial Vehicles, UAV

CARVAJAL, Fernando; AGÜERA, Francisco; PÉREZ, Mónica

University of Almeria

Ergonomic design of an object detector device for blind people

LENGUA, Ismael; DUNAI, Larisa; PERIS FAJARNÉS, Guillermo ; DEFEZ, Beatriz

Universitat Politècnica de València

Evolution of the graphic representation of utility networks in urban planning plans

GOMIS S., Jordi; TURÓN R., Carlos

Universitat Rovira i Virgili

[F]

Freeform surfaces adaptation through developable strips.

GONZALEZ QUINTIAL, Francisco; SANCHEZ PARANDIET, Antonio

UPV-EHU

[G]

Geometric documentation of mining industrial historical heritage: application to a Cornish pumping engine house from the ancient mining district in Linares-La Carolina (Jaen)

ROJAS SOLA, José Ignacio; MONTALVO GIL, Juan Manuel; CASTRO GARCÍA, Miguel

UNIVERSIDAD DE JAÉN

Geometric documentation of mining industrial historical heritage: application to a metallic headframe from the ancient mining district in Linares-La Carolina (Jaen)

MONTALVO GIL, Juan Manuel; ROJAS SOLA, José Ignacio; CASTRO GARCÍA, Miguel

Universidad de Jaén

Geometric documentation of the flour factory El puente Colgante in Aranjuez (Madrid)

MILLÁN GHISLERI, Juan; ROJAS SOLA, José Ignacio; SAN ANTONIO GÓMEZ, Carlos

Technical University of Madrid & University of Jaén

Geometrical definition and virtual reconstruction of the vertical cage and horizontal plate presses for extraction grape must

RAMIREZ FUENTES, M Angeles; CASTRO GARCÍA, Miguel; CARRANZA CAÑADAS, M Pilar; BURGOS LADRON DE GUEVARA, E; MONTES TUBIO, Francisco de Paula

Universidad de Córdoba; Universidad de Jaén

GIS analysis for settlements accuracy study on Madrid Province (AGE Tomas Lopez 1804)

FERNÁNDEZ SÁNCHEZ, José Salvador; MANZANO AGUGLIARO, Francisco; SAN ANTONIO GÓMEZ, Carlos

University of Almeria/ Polytechnic University of Madrid

[H]

Human skeletal system virtualization by using solid voxels models

ALONSO, Jorge; ÁLVAREZ, Rafael; ROCES, Jorge

Universidad de Oviedo

[I]

Impervious surface areas classification from GeoEye-1 satellite imagery using OBIA approach in a coastal area of Almeria (Spain)

FERNÁNDEZ LUQUE, Ismael; AGUILAR TORRES, Fernando J.; AGUILAR TORRES, Manuel A.; ÁLVAREZ TABOADA, Flor; SALDAÑA DÍAZ, María del Mar

University of Almeria

Implementation of Service-Learning Projects Based on Dynamic Documentation in Engineering Colleges

GARCÍA ALONSO, Jesús Manuel; SORIANO HERAS, Enrique; GARCÍA VICARIO, Imanol; BLAYA HARO, Fernando

CARLOS III DE MADRID, POLITÉCNICA DE MADRID, SALESIANOS ATOCHA

Improving Passive Safety of Sports Equipment through Experimental Testing of New Protection Devices

COSTABILE, Gianluca; AMODEO, Giuseppe; LANZOTTI, Antonio; MARTORELLI, Massimo; ODENWALD, Stephan; SCHWANITZ, Stepan

University of Naples Federico II, Dept of Industrial Engineering

Incorporation of constructivist techniques for the improvement of the tutored teaching in computer based classrooms

ROCES, Jorge; ÁLVAREZ, Rafael; ALONSO, Jorge

Universidad de Oviedo

[K]

Knowledge driven verification of positional tolerances

CONCHERI, Gianmaria; MILANESE, Vitaliano (2)

Università di Padova (1), Università di Udine (2)

[M]

Masonry Vaults: The efficiency of geometry

FORTEA, Manuel; REYES, Antonio Manuel; CANITO, José Luis; GARCÍA, Justo

Universidad de Extremadura

Method for 3D printing of highly complex geometries: The first “flat torus” printed in 3D

HENOCQUE, Thierry; MARIN Philippe

University of Grenoble / AIP Primeca Dauphine-Savoie

Mobile device application to calculate and simulate energy expenditure in households using CAD tools

ÁLVAREZ PEÑÍN, Pedro Ignacio; BUSTO PARRA, Bernardo; PANDO CERRA, Pablo

Oviedo

Modelling of the crumpling process of a paper sheet

ROHMER, Serge; MERAT, Alexis; FLODERER, Vincent; COPINET, Alain

University of Technology of Troyes

[N]

New trends in e-learning platforms and content management for learning in engineering

LENGUA, Ismael; DUNAI, Larisa; PERIS FAJARNÉS, Guillermo ; DEFEZ, Beatriz

Universitat Politècnica de València

[O]

Optimal dimensioning for the transmission shaft of a longitudinal gearbox

GERBINO, S; LANZOTTI, S.; PATALANO, S.; RUFRANO, V.; VITOLO, F

UNIVERSITY OF NAPLES FEDERICO II, UNIVERSITY OF MOLISE

[P]

Performance Evaluation of CUDA programming for machining simulation

ABECASSIS, Felix; LAVERNHE, Sylvain; TOURNIER, Christophe; BOUCARD, Pierre-Alain

Ecole Normale Supérieure de Cachan

Proposal about the design and the choice of road signs

ROVIDA, Edoardo; VIGANO, Roberto;

Politecnico di Milano - Dipartimento di Meccanica

Proposal of a data-base to support the embodyment design phase

ROSA, Francesco; ROVIDA, Edoardo; VIGANO, Roberto

Politecnico di Milano

[R]

Radiometric Comparison between GeoEye-1 and WorldView-2 Panchromatic and Multispectral Imagery

AGUILAR, Manuel Ángel; SALDAÑA DÍAZ, María del Mar; AGUILAR, Fernando; FERNÁNDEZ LUQUE, Ismael

University of Almería

Remote Sensing for Monitoring the Effects of Agricultural Policies: the Case of the Irrigated Area of Tadla Azilal (Morocco)

NEMMAOUI, Abderrahim; AGUILAR, F.J.; GARCÍA LORCA, A.; AGUILAR, M.A.

University of Almeria

Represent mean condense complex information: the updating of new media for the construction field

LO TURCO, Massimiliano; NOVELLO, Giuseppa

Politecnico di Torino

[S]

Study of the product - services design and environment influence on the elderly’s daily life

MORER CAMO, Paz; GONZÁLEZ ZUAZO, Itziar

Navarra

Survey of jointed rock mass from 3D point clouds for the wedge stability analysis

MENÉNDEZ DÍAZ, Agustín; ORDÓÑEZ GALÁN, Celestino; BOUZA RODRÍGUEZ, Benito; GARCÍA CORTÉS, Silverio

Universidad de Oviedo

[T]

Teaching geometric modeling and analysis of tensegrity structures

GOMEZ JAUREGUI, Valentin; OTERO, Cesar; ARIAS, Ruben; MANCHADO, Cristina

Universidad de Cantabria

Teaching methodology of the subject “Graphic Expression” using Web - based CAD tools

PANDO CERRA, Pablo; ÁLVAREZ PEÑÍN, Pedro Ignacio; BUSTO PARRA, Bernardo

Universidad de Oviedo

Teaching practice for subjects of graphic expression through project-based learning

MARÍN GRANADOS, Manuel Damián; BLÁZQUEZ PARRA, Elidia Beatriz; GUTIERREZ ARIZA, Francisco Javier; LADRÓN DE GUEVARA MUÑOZ, Mª Luisa; LADRÓN DE GUEVARA MUÑOZ, Mª Carmen

UNIVERSIDAD DE MÁLAGA

The educational use of CAD tools for technology education

LAVABRE, Renaud; LABEILLE, Didier; BONZOM Christian; STEPHAN, Pierre

Institut Clément Ader (ICA / Toulouse

Towards new processes to reverse engineering of digital mock-ups from a set of heterogeneous data

BRUNEAU, Marina; DURUPT, Alexandre; ROUCOULES, Lionel; PERNOT, Jean-Philippe

Université de Technologie de Compiègne

[V]

Verification of positional tolerances with a 3D non-contact measurement method

MINGUEZ, Rikardo; ARIAS, Agustin; ETXANIZ, Olatz; SOLABERRIETA, Eneko; BARRENETXEA, Lander; OLANO Aitor

University of the Basque Country UPV/EHU

Virtual simulation of chimney shaft of Valdeazogues

ALMANSA, Emiliano; FUENTES, Demetrio; MONTES TUBIO, Francisco de Paula; CASTRO, Miguel.

UCLM / UCO